SP 320, 4 kg sett med slow herder, F505-029

Artikkelnr.: 28036

SP 320 kan brukes på samme måte som SP 106, men fordi den er så klar brukes den vanligvis til lakkering av treverk. Med SP 320 får man raskt et tykt lag – tre lag SP 320 gir samme lagtykkelse som tolv lag tradisjonell lakk. SP 320 er tilgjengelig med rask

NOK1 699,00 inkl. mva.
  • Produktinfo
  • Produktanmeldelser (0)

SP 320 is a solvent-free, clear epoxy coating that provides a high clarity, tough finish to whatever it is applied to. When used for coating wood, just a few coats will provide both protection and a depth of clarity that can only otherwise be achieved with many more coats of a conventional varnish. The epoxy coating will protect most surfaces from moisture ingress, and will also add strength to softwood surfaces. On horizontal surfaces, SP 320 may be poured on as a flow-coat, providing an instant, thick coating layer in just one application. If the coating is to remain unpainted, the cured material should be overcoated with a UV-resistant varnish, since an unprotected epoxy coating will gradually yellow in sunlight.


Due to its low viscosity, and excellent wetting characteristics, SP 320 may also be used with lightweight glass reinforcements, such as RE210D, to provide a clear, sheathing layer. When this is further coated with extra layers of SP 320, the result is a glass-reinforced clear coating which is exceptionally strong and hard-wearing. Whilst primarily designed as a coating, SP 320 is completely solvent-free and so can be mixed with the Gurit Filler range to produce filling compounds, adhesives and fillet mixes. Some information about the filler range, and how to use the fillers, is contained in this data sheet. Further details can be found in the Filler Guide.


 

 SP 320

Skriv en produktanmeldelse og del dine erfaringer med dette produktet med andre kunder.